中文字幕无线观看

<label id="xtunl"></label>

<big id="xtunl"><em id="xtunl"></em></big><thead id="xtunl"><option id="xtunl"></option></thead>
    <strike id="xtunl"></strike>
  1. <code id="xtunl"></code><big id="xtunl"></big>

    <center id="xtunl"></center>
  2. <object id="xtunl"></object>
    İ
    English
       
     
    Temperature cont...
       > ZWK/WCK intell...
       > .Heat treatmen...
       > .DWK-C type co...
    Ceramic electr...
    Welding rod ov...
    Flux drying ma...
    Electric air b...
    Multipurpose s...
    Electric heate...
        Products

      [Close]
    LWK-B-10KW heat treatment temperature control box

    Various electric heater during the warm-up , elimination of hydrogen , must be equipped with the heat treatment temperature control box to achieve the heating , temperature , cooling the various changes. 
    Performance:
    1. Input voltage 220VAC
    2. The total power output of 10KW / 45A
    3. Output channel 1 , the maximum output of each channel 10KW / 45A
    4. Temperature control point one , point one temperature , independent temperature control independently set technology curve
    5. The temperature 0-1050
    6. Each channel is equipped with leakage protection switch, improve the safety performance
    Work with the lights on and off to indicate the heater 7. The panel for easy and intuitive
    Features :
    1. Temperature controller electronic digital instrumentation for temperature control simple and convenient dedicated member
    2. The main circuit SCR output , no pollution Chaosheng
    3. Over-temperature , under-temperature SCR flexible off
    The output voltage can be adjusted 0-220V AC output 220V AC
    5. SCR output is small , the control device is a portable , weighing 12KG
    6. for Electricity large installation, maintenance , preheat eliminate hydrogen annealing.
    LWK type heat treatment temperature control box datasheets
    Model
    Rated output power
    Temperature control point
    Record points
    LWK-30-0101
    30
    1
    1
    LWK-60-0306
    60
    3
    6
    LWK-90-0306
    90
    3
    6
    LWK-120-0612
    120
    6
    12
    LWK-180-0612
    180
    612
    LWK-240-0612
    240
    612
    LWK-360-1212 360 12 12
    LWK-480-1212
    480
    1212
    Complete metal components heat treatment equipment has three components , namely ceramic electric heater , temperature control box and auxiliary materials .
    1 . 
    2 . 
    3 . 
    Caution:
    1 , the workpiece is heated to be a reliable ground .
    2 , when the heater is not allowed to overlap .
    3 , thermocouple and artifacts should be reliable even stickers .
    Remarks :
    1 , the width of the heater should be heated for 8-12 times the wall thickness of the object .
    2 , according to user needs can complete supply lead cable , thermocouple, thermal insulation covering materials and special welding temperature control cabinet and the capacitor coupling device .
    3 , the power error of 3%, the shape tolerance of 2%.
    4 , special specifications can be special ordered .

     
    Copyright©Wujiang Xinsheng Electric Equipment Co., Ltd.  KICP11054944̖   Httphttp://www.clairetherd.com   
    Tel.0512-63685811  Fax.0512-63685810   Mob.13962586530   Add.Meiyan Development zone,Wujiang city,China
    中文字幕无线观看
    <label id="xtunl"></label>

    <big id="xtunl"><em id="xtunl"></em></big><thead id="xtunl"><option id="xtunl"></option></thead>
      <strike id="xtunl"></strike>
    1. <code id="xtunl"></code><big id="xtunl"></big>

      <center id="xtunl"></center>
    2. <object id="xtunl"></object>